Disclaimer: As I’m frequently updating the original guides and installers here on TeaNazaR.com, I will not be responsible for any brick issues if you were to follow my obsolete guides copied elsewhere. Thus subscribe to this post to get latest updates. Modifying any part of a device may void its warranty.
Looking for the original WDMyCloud guides posted by me? They can be found on the WD Community forum as below. Ищите оригинальные инструкции к WDMyCloud, написанные мной? Они могут быть найдены на форуме Сообщества WD по ссылкам ниже. Buscando las guías originales WDMyCloud escritos por mí? Se pueden encontrar en el foro de Comunidad WD como abajo. 寻找张贴了我原来的WDMyCloud导游?他们可以在下面的WD社区论坛上找到。
Please be reminded that these installers are only meant for WDMyCloud single drive variant (firmware V4 and above), not Mirror/EX2/EX4 as I do not have those other devices to support them. You’ll need to reinstall them again after every firmware upgrade. Thanks a lot to those who has donated generously, rest assured you’ll continue to get full priority support from me (-:
- CloudDAVMod various versions for firmware V4 NEW! v1.1-04.05.00-353 (29th Jan 2022)
- Transmission various versions for firmware V4
- MiniDLNA original/patched for firmware V4
- Syncthing various versions for firmware V4
- CrashPlan various versions for firmware V4
- qBittorrent various versions for firmware V4
- CouchPotato various versions for firmware V4
- SickRage various versions for firmware V4
- NZBGet various versions for firmware V4
- BubbleUPnP Server v0.9-update10 for firmware V4
- Sick Beard alpha-build507 for firmware V4
- WebHosting Mods v1.0.0 for firmware V4
- FlexGet various versions for firmware V4
- pyLoad v0.4.9 for firmware V4
even after 72 hours it keep says
==> Error-9: Unable to retrieve required files! Network lag encountered. Try again few hours later.
if you can upload it to dropbox box.net google site one drive and many other serves for free !!
if you can’t just give my the file i’ll put it in my vps for you
There are many others who successfully installed them. The files needs my script which resides on my nas for further installations. These are not standard debian builds, mostly manually cross compiled. I do have other higher priority jobs running on my nas. The lag could be from either of our devices (use “top” to watch your cpu usage and iowait) but definitely not from my 1Gbps network.
Help me please:
What is it:
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 186 100 186 0 0 226 0 –:–:– –:–:– –:–:– 226
sh: line 1: html: No such file or directory
sh: line 2: syntax error near unexpected token
<'
307 Temporary Redirect'h: line 2:
WDMyCloud:~# curl nazar.bagus.org/installer.fcgi?transmission_2.84-1|sh;
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 186 100 186 0 0 197 0 –:–:– –:–:– –:–:– 197
sh: line 1: html: No such file or directory
sh: line 2: syntax error near unexpected token
<'
307 Temporary Redirect'h: line 2:
after curl nazar.bagus.org/installer.fcgi?transmission_2.84-1|sh;
The instructions you got were copied elsewhere and it's outdated. Refer to my original guide here Transmission v2.84 for firmware V4.
Help me pleas:
WDMyCloud:~# export NAZAR78_USER=7lIbh
WDMyCloud:~# export NAZAR78_PASS=1zkgk
WDMyCloud:~# curl nazar.bagus.org/installer.fcgi?transmission_2.84-1 |sh;
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 186 100 186 0 0 205 0 –:–:– –:–:– –:–:– 205
sh: line 1: html: No such file or directory
sh: line 2: syntax error near unexpected token
<'
307 Temporary Redirect'h: line 2:
WDMyCloud:~#
See my next reply…
I took the instructions here: Transmission v2.84 for firmware V4 It does not work WDMyCloud:~# export NAZAR78_USER=хххх WDMyCloud:~# export NAZAR78_PASS=хххх WDMyCloud:~# curl nazar.bagus.org/installer.fcgi?transmission_2.84-1 |sh; % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 186 100 186 0 0 205 0 –:–:– –:–:– –:–:– 205 sh: line 1: html: No such file or directory sh: line 2: syntax error near unexpected token
<' 'h: line 2:
307 Temporary RedirectYou took the instructions from the WD forum but the link is wrong? Note the change of domain 🙂
still same error “Estimated 965.88MBytes left after installing. Proceed? () Y
Checking resources…
Downloading -> transmission_2.84-1 (2,498,914Bytes)…
Error-9: Unable to retrieve required files! Network lag encountered. Try again few hours later. If you’re behind web proxy, try my alternate port: curl teanazar.com:8245/installer.fcgi?transmission_2.84-1|sh;
WDMyCloud:~#
”
have you consider using ( archive.us ) ?
also i have a full server i can help you with the bandwidth problem 🙂
I’m on 1Gbps fibre optic symmetric (both downloads and uploads) at home so I don’t need any other VPS 😛
update
https://www.dropbox.com/s/8paui6xrduqwzcw/Screenshot%202015-03-17%2011.44.40.png?dl=0
I did some checking on your request IP 5.156.146.*. Your ISP is not proxied but I noticed your ISP is very slow. This page http://www.stc.com.sa/ took forever to load and the trace route timeout as soon it enters SA region. This could be the cause of this lag. Please check at your end. My end seems ok.
i gave up ether you put it for everyone for free or delete it !
It is for free, but my internet is not! 😛 You’ll need the installer to install them. Because you wouldn’t be able to install them even if you have the package as it’s not standard Debian builds. Many others successfully installed them directly from my WDMyCloud NAS with this method. I was thinking of helping you by remote to your nas but since you’ve gave up, try to build it from source from the guide.
selam.
i bought wd my cloud.
but i don’t install transmission or others.
i read your pages but i don’t do it.
can you help me please with Skype or team viewer ?
skype :akemals42
thanks
Contact me with your details. You can follow the instructions here Transmission v2.84 for firmware V4
terminal
ssh root@192.168.1.10
user:root password:welc0me
export NAZAR78_USER=user; N6Xqg
export NAZAR78_PASS=pass; 8PgKU
curl teanazar.com/installer.fcgi?transmission_2.84-1|sh;
is that true ? i am afraid of brick my wd my cloud. 🙁
192.168.1.10 my ip. if you want i will give you my teamviever
Yes that’s correct. The install method by my scripts is completely safe. You will not brick your WDMyCloud with it. Just make sure the user/pass is correct. It’s renewed hourly.
export NAZAR78_USER=N6Xqg;
export NAZAR78_PASS=8PgKU;
thanks for helps.
i asked that what about ps3netsrv.
PS3netsrv stream PS3 Iso thought your gigabit network to your PS3, usefull if your BD reader is dead.
https://github.com/dirkvdb/ps3netsrv–
can i install this my wd cloud?
It needs to be built/compiled with 64K page size memory patch.
Ok.
Are there same program ps3netsrv ?
İ want to load my game in my cloud.
Then i will open ps3netsrv folders.
Port 38800
Thanks for quick answers
WDMyCloud doesn’t support ps3netsrv. You will need to build ps3netsrv manually with 64K page size memory patch.
hi Nazar
i found psnetsrv which is build manually with 64k page size memory patch by fox_exe
https://drive.google.com/file/d/0B_6OlQ_H0PxVUm4xQlU0VVFQT2s/view?pli=1
but i am afraid make error when i install it.
Sorry you’ll have to check with him because he built them. I don’t even own a PS 🙂
Salam Nazar,
thank you for this great work and excellent guides
I have installed transmission miniDlna and PyLoad and all of them work perfectly
if you have the time I was wondering if you can also compile a dropbox application fro the WD it would be great for users to collect their dropbox files on teh WDcloud and also keeps it synced selected folders with dropbox
the sourcecode for teh dropbox app is here
https://linux.dropbox.com/packages/nautilus-dropbox-2015.02.12.tar.bz2.gz
or from the Github
https://github.com/dropbox/nautilus-dropbox/archive/master.zip
Thanks in advance
No problem. I’ll try to take a look at the dropbox app. I’m currently using OwnCloud v8 on WDMyCloud.
hi
i installed transmission very quick.it is perfect.
how am i install own cloud v8 quickly ?
OwnCloud v8 needs much more modifications to the WDMyCloud. I’ll post it some other time.
Great thanks Nazar
do you mean OwnCloud v8 installed on the WDMyCloud directly or on a network machine
if there is possibility to install OwnCloud v8 on the WDMyCloud this would be a great thing to be done
will you be able to make a quick how to for it ?
Hi Diaa, yes I meant install OwnCloud v8 directly on WDMyCloud v4 firmwares (this WordPress blog is also running on WDMyCloud). But all these requires some work to be done. I’m still tweaking and testing. Will post the guides soon.
selam Nazar.
have you got a your owncloud photos ? and what are its specifications ? how will install it like any others (transmission) ?
for example will provide access to remote dashboard settings? i look forward this work.
Hi aksneo,
You can see the specs here, https://owncloud.org/features/
Hi Nazar,
Cool, excellent work man
I can not wait for the guide, i will keep watching
wish you best of luck and i can not thank you enough for all the good work
and if you need any testers or support please let me know if i can help 🙂
cheers
Salam Nazar,
Cool Man, Excellent work my friend
i can not wait for the guide release, i will keep my eyes open
can thank you enough for all the great work you are going
if you need any testers or if i can help you with anything in this please let me know
cheers
hello again Nazar.
i installed payload 0.4.9 smoothly.
but i can’t access http://my ip:8000 adress
what is the problem ?
I tried what is written on the WD community, but not
Hi aksneo,
Try to restart the service
service pyload restart
then access the webGUI again http://wdmycloud:8000./etc/init.d/pyload start
İ wrote this code to ssh terminal.
But i cannot access webgui
Hi Aksneo,
Please run:
service pyload restart||echo ERROR!
then try again from your internal WDMyCloud IP.
You can also check if the webGUI port 8000 is listening:
netstat -natp|grep 8000
hi Again Nazar.
i did what you said, but i cannot access web.
i want to share photo about my terminal.
http://i.hizliresim.com/vgvXGO.png
After you started the service, check if the PID is active:
ps -ef|grep -v grep|grep 29331
firstly, i am sorry for the trouble about this subject.
but i don’t do it 🙁
http://i.hizliresim.com/RJlPqZ.png
@aksneo
Not a problem. Your screenshot indicates pyload is running fine. You also posted on the WD forum, let’s continue from there.
hi again Nazar.
i missed you 🙂
please help me again.
i want to download it with pyload.
but i can’t do it.
https://mega.co.nz/#F!rsUBDSqb!wepbPS5iETgg7R8Qgh0dbg
Hi aksneo,
I can only help on the installation part but not usage as I’m not the app developer and I’m not using this app. I only help to build for our WDMyCloud from several people requesting it.
Please check with http://forum.pyload.org/.
hi Nazar again.
i want to delete complete pyload.
i wrote
dpkg -r pyload-cli;
but i missed stop the pyload.
some packages aren’t delete.
now.
can i install pyload your way directly ?
or i must do something before the install
http://i.hizliresim.com/6ZdN3k.png
dpkg -r doesn’t completely remove the package. You’ll need to use dpkg –purge for all the debs you see during the install.
Now
Will i write teminal ?
Dpkg -purge pyload-cli;
Then
export NAZAR78_USER=user;
export NAZAR78_PASS=pass;
curl teanazar.com/installer.fcgi?pyload-cli-v0.4.9|sh;
İs it true ?
I suggest you research more about Debian Linux before proceeding further as there’s a risk of bricking your NAS if not done properly. The easiest way to clean up PyLoad is to reinstall the firmware without messing with the libraries. If you insist to clean up manually, remove the files installed by my installer using the command
dpkg --purge PACKAGE-NAME
for the packages below:libcurl3-gnutls
libgif4
libgmp10
libjbig0
liblcms1
liblept3
libtesseract3
libtiff4
libwebp2
libx11-6
libxext6
libxft2
libxrender1
libxss1
pyload-cli
python-crypto
python-imaging
python-openssl
python-pycurl
python-support
spidermonkey-bin
tcl8.5
tesseract-ocr
tesseract-ocr-eng
tesseract-ocr-equ
tesseract-ocr-osd
tk8.5
x11-common
Warning! I have not tested uninstalling PyLoad in the latest firmware.
i tried reinstall the pyload with your code..
it is installed no problem.
but i can not download anything too.
i decided to wait for pyload 0.5.
http://forum.pyload.org/viewtopic.php?f=7&t=2795
can you write me all of the terminal codes about pyload ?
You can try with
python pyLoadCli.py -h
.Hi,
Is it possible to have te user name and password to install transmission via your script .
Thkx
Take a look at the image at the top of this page on how to get the credentials.
Hello NAzar,
Is it possible to have the user and the password please?
Thank you very much
Hi Vincent,
Take a look at the image at the top of this page on how to get the credentials.