Disclaimer: As I’m frequently updating the original guides and installers here on TeaNazaR.com, I will not be responsible for any brick issues if you were to follow my obsolete guides copied elsewhere. Thus subscribe to this post to get latest updates. Modifying any part of a device may void its warranty.
Looking for the original WDMyCloud guides posted by me? They can be found on the WD Community forum as below. Ищите оригинальные инструкции к WDMyCloud, написанные мной? Они могут быть найдены на форуме Сообщества WD по ссылкам ниже. Buscando las guías originales WDMyCloud escritos por mí? Se pueden encontrar en el foro de Comunidad WD como abajo. 寻找张贴了我原来的WDMyCloud导游?他们可以在下面的WD社区论坛上找到。
Please be reminded that these installers are only meant for WDMyCloud single drive variant (firmware V4 and above), not Mirror/EX2/EX4 as I do not have those other devices to support them. You’ll need to reinstall them again after every firmware upgrade. Thanks a lot to those who has donated generously, rest assured you’ll continue to get full priority support from me (-:
- CloudDAVMod various versions for firmware V4 NEW! v1.1-04.05.00-353 (29th Jan 2022)
- Transmission various versions for firmware V4
- MiniDLNA original/patched for firmware V4
- Syncthing various versions for firmware V4
- CrashPlan various versions for firmware V4
- qBittorrent various versions for firmware V4
- CouchPotato various versions for firmware V4
- SickRage various versions for firmware V4
- NZBGet various versions for firmware V4
- BubbleUPnP Server v0.9-update10 for firmware V4
- Sick Beard alpha-build507 for firmware V4
- WebHosting Mods v1.0.0 for firmware V4
- FlexGet various versions for firmware V4
- pyLoad v0.4.9 for firmware V4
Hello, dear Nazar!
I try to download but every time I got an error:
Error-9: Unable to retrieve required files! Fail to validate request. Try again with a new ‘NAZAR78_KEYS’ from ‘http://teanazar.com/wdmycloud’.
Maybe is there another way to install that?
Hi Evgeny,
Please try my alternate port 8245 as advised when you ran the installer. Most probably you’re behind a proxy.
I’ve tried with port 8245 but the same, now I have following error message:
Error-9: Unable to retrieve required files! Fail to validate request. Report to me your IP ‘109.188.125.16’ if you still have issues. If you’re behind web proxy, try my alternate port: curl teanazar.com:8245/installer.fcgi?transmission_2.84-1|sh;
Note: I don’t have any proxy, but my connection is not stable(LTE).
Thank you for your support;)
Could be LTE is the reason as I can see there’s many successfully installs till now. Maybe you could try later during no-peak hours.
Helo. I try install to Wd my cloud v04.01.04-422 pyLoad from this subj, but got erorr.
WebGui does not work.
How solve this troble?
error log:
Traceback (most recent call last):
File “/usr/bin/pyLoadCore”, line 42, in
from module import InitHomeDir
File “/usr/share/pyload/module/InitHomeDir.py”, line 28, in
__builtin__.owd = path.abspath(“”) #original working directory
File “/usr/lib/python2.7/posixpath.py”, line 356, in abspath
cwd = os.getcwd()
OSError: [Errno 2] No such file or directory
Error-1: Unable to configure pyLoad!
Try:
pyLoadCore -s;
After that:
service pyload start;
Dear Nazar, mistakenly let my WD 2GB with the option of automatic update.
Now I have the vercion v04.01.04-422. and I can not see Transmission (http: // wdmycloud: 9091 /).
I recommend I do?
Thank you very much beforehand.
Hi AlmarillO,
Once the firmware is upgraded, every mod will be lost so you’ll need to restore including Transmission.
Try to make a system only restoration, but not working. vercion remains the same (v04.01.04-422).
As I can down version?
The system restore won’t downgrade or bring back your mods because the rootfs partition has been upgraded to the newer firmware. What I meant was to reinstall Transmission again.
Thank you very much, reinstall and everything ok. I appreciate your work.
No problem, enjoy (-:
Hello. What about btsyck or sinkthing? Is there way to install this tools on wd my cloud v4.xx ?
BTSync is a closed source code so we can’t produce the 64k pagesize memory patch for V4 firmwares. I’ve got Syncthing v0.11.7 running in V4 firmware but it’s not stable, frequently crashing. If there’s demand for beta Syncthing I would probably add it to the installer.
Hi mate tried to install transmission and got this error:
Checking resources…
Downloading -> transmission_2.84-1 (2,498,914Bytes)…
Error-8: Unable to retrieve required files! Server issued an error response.
Tried again and got a latency warning,
Error-9: Unable to retrieve required files! Network lag encountered. Try again few hours later.
Waited a bit then tried again but now I’ve been permanently barred?
teanazar.com: You 86.30.128.14 are the 3rd invalid request number 53 since my FastCGI was refreshed and started counting )-: WARNING! x3 strikes of invalid request per/hour and you will be temporarily banned for another hour! Unauthorized attempts is not tolerated and warrants permanent ban! You have been permanently banned from using this service due to unauthorized attempts on 2015/06/02 19:50:44 GMT+8!
Bit extreme?
I reviewed my logs since the past few days and saw few installer requests from your IP. Unfortunately the last one which doesn’t look genuine caught my anti-bot permanent ban about an hour ago. Did you honestly run the commands as instructed? :p
I thought I did. I retried the process after the first error but thought I could reuse the same credentials as I thought they were good for an hour.
BTW I have a paid Dropbox account happy to host files for you if that helps.
Yes you could use the same credentials within the hour but you still need the unique keys for every install process. Reason for the perm ban was the installer detects security token was generated not according to what it expected which is impossibly an error unless it was done manually. I’ve removed the ban for now. No worries I have lots of bandwidth and space to spare but still I need to implement all these to safe guard my network 🙂
For those who’s following this post, a new APP has been added to the installer, Syncthing v0.11.8 for firmware V4. A BTSync alternative! Install Syncthing in more than one devices to sync several folders within each, Nix, Windows, Mac and Android devices.
For those who’s following this post, a new APP has been added to the installer, NZBGet v15.0 for firmware V4. The most efficient usenet downloader.
For those who’s following this post, a new APP has been added to the installer, Sick Beard alpha-build507 for firmware V4. The ultimate PVR application that searches for and manages your TV shows.
For those who’s following this post, a new APP has been added to the installer, CrashPlan v4.2.0 for firmware V4. CrashPlan makes it easy to protect your digital life, so you can get back to what’s important in real life.
Hi Teana and Nazar
Thanks for the work you put into supporting customizing the wdmycloud. The post on crash plan is a bad link. What happened?
Andy
Hi Andy,
No problem. I just checked the post on CrashPlan and it’s valid for both here and WD forum. Which link you’re referring to?
I get this message "The message you are trying to access is not available." when I visit CrashPlan various versions for firmware V4, which is the link in your post. I'm not signed in (and apparently sign in is broken today). Is it possible that post is somehow protected?
Arh, I see the reason why. The WD forum is under maintenance. I’m always logged in so I still can view the forum. You might wanna try later. This is a notice from their site today:
http://community.wd.com/
Important Notice: The WD Community is undergoing registration and login maintenance. Users will be unable to login or register for the next day. If you have checked the box to keep you signed in, you should be able to access the community. We are sorry for the inconvenience.
I thought it was because of the maintenance but seems I’m having issues with the original post too after receiving feedbacks about the post. I’m checking with them here:
http://community.wd.com/t5/WD-My-Cloud/Post-inaccessible-to-public/td-p/886623
any news can you send the link (curl url) to download crashplan please
Do watch out this WD Forum thread for updates. I’m not sure why it’s locked, else I’ll open a new one if there’s no issues.
http://community.wd.com/t5/WD-My-Cloud/Post-inaccessible-to-public/td-p/886623
The link is back up! According to the moderators it got caught by spam filters 🙁
Thanks I try to install the crashplan but I get this error : Error-1: Unable to install required files! ‘openjdk-8-jre-headless_8u45-b14-3_armhf.deb’
What is your firmware version?
Still getting error message :
Installing required files by dependencies…
Installing (1)-> openjdk-8-jre-headless_8u45-b14-3_armhf.deb 50MBytes…
Error-1: Unable to install required files! ‘openjdk-8-jre-headless_8u45-b14-3_armhf.deb’
Im in the lasted version WD MyCloud : v04.01.04-422
Think I’ve found the issue. It’s the man path missing. I’ve fixed it. Try again.