Loading..._\m/
WDMyCloud4TB

WDMyCloud

 Last updated: 19th February, 2022, 9:18 PM 

Live Counter

P/S: There's also a donation button of any generous amount to buy me coffee (-:
If you’re happy with these free contributions, the least you could do is to click the “heart like” icon on the first thread of the post in the WD forum.

 

Disclaimer: As I’m frequently updating the original guides and installers here on TeaNazaR.com, I will not be responsible for any brick issues if you were to follow my obsolete guides copied elsewhere. Thus subscribe to this post to get latest updates. Modifying any part of a device may void its warranty.

Looking for the original WDMyCloud guides posted by me? They can be found on the WD Community forum as below. Ищите оригинальные инструкции к WDMyCloud, написанные мной? Они могут быть найдены на форуме Сообщества WD по ссылкам ниже. Buscando las guías originales WDMyCloud escritos por mí? Se pueden encontrar en el foro de Comunidad WD como abajo. 寻找张贴了我原来的WDMyCloud导游？他们可以在下面的WD社区论坛上找到。

Please be reminded that these installers are only meant for WDMyCloud single drive variant (firmware V4 and above), not Mirror/EX2/EX4 as I do not have those other devices to support them. You’ll need to reinstall them again after every firmware upgrade. Thanks a lot to those who has donated generously, rest assured you’ll continue to get full priority support from me (-:

Loading…

Related:

IT-Techs
Transmission v3.00 for WD My Cloud firmware V4
IT-Techs
Transmission v2.94 for WD My Cloud firmware V4
IT-Techs
Transmission v2.93 for WD My Cloud firmware V4
IT-Techs
MiniDLNA v1.2.0 for WD My Cloud firmware V4

789 thoughts on “WDMyCloud”

    1. Your proxy is changing the request. Avoid using proxy, use the alternate port 8245 instead.

      Reply

  3. Hi I’m having a few issues with my my cloud would you have a guide to full remove minidlna , qbittorrent,transmission,pyload
    .lol might have over done it a bit .

    Reply

    1. You can use dpkg -P --force-all package but there’s still other dependencies lurking. Some not safe to remove. Best to reflash the firmware again to start fresh. Usually a problem if you filled the rootfs by downloading large files to it.

      Reply

  4. Checking resources…
    Error-13: Unable to retrieve required files! Fail to validate request. Report to me your IP ‘95.15.0.100’ if you still have issues. If you’re behind web proxy, try my alternate port: curl teanazar.com:8245/installer.fcgi?transmission_2.92-1|sh;

    hi again nazar
    i want to load transmission,but i have got an error.

    Reply

  5. Hi Nazar. Could you help me? I tried installing and this is what i got

    …
    Installing required files by dependencies…
    Installing (1)-> transmission 0Bytes…
    Error-1: Unable to install required file! ‘transmission’

    Has it been installed?

    Thanks

    Reply

    1. The download seems failed and no it’s not installed. Just try to install again.

      Reply

  6. Hi

    I know this may be a long shot but i need Transmission 2.03 for mycloud, is there anyway i can get it from you?

    Reply

    1. It’s an old version some 6 years ago I think. Any reason why you need it whereas the v2.84 and above works on the MyCloud. Not sure if it’s worth for me to work on it due to the older dependencies.

      Reply

  7. hello when i try to gen credentianls i get an error seo.teanazar page saying an adblock is installed where no adblocker or antivirus is present in the system! or my browser tried on all browser but same happends..!! Can you help please?

    Reply

  8. Will your releases work on a My Cloud 5TB (Model: RWDBCTL0050HWT-EESN)? I’ve been looking at the 4TB version but they’re out of stock at the moment but the 5TB ones are available and I wondered if your releases will work, Ideally I’m looking at an NZB grabber and in time sonarr ( i know it’s not available at the moment)

    Reply

    1. These releases are only meant for MyCloud single bay firmware v4, the 1st generation. Will definitely not work on the 2nd generation due to changes done by WD. I’m not sure the model# you mentioned belongs to which generation, most probably 2nd if it’s a new batch since I don’t recalled seeing a 5TB 1st gen model previously. Perhaps you could check with the WD forum. Do note there’s also 4TB version of the 2nd generation.

      Reply

  9. Hello,

    i really would this mod give a try, but the download did not start in any way. i have followed the procedure without success.
    is there anything i can do furthermore?

    thanks for your time.
    Francesco

    Reply

    1. Try again, I was working on something and the service was interrupted.

      Reply

      1. thanks, now the message is this
        Error-12: Unable to retrieve required files! Invalid, mismatched keys/app or already used ‘NAZAR78_KEYS=4Hqks’ detected. Retry using the permanent donation credentials from your DonationID if you have or get a new anonymous credentials from ‘http://teanazar.com/wdmycloud/’.

        Reply

        1. I noticed you have already successfully installed CloudDAVMod after posting this. The credentials and keys are unique to each app and install request. Read the F.A.Q. if you have further issues.

          Reply

  10. Hello. Help me please with wd my cloud 3 tb.
    1)The problem is that when connecting through putty, after entering username and password,putty closes automatically and doesn’t display any errors. What is the problem and how to solve the problem?
    2)Hello,how to install transmission for WD MY cloud 3 tb with firmware ь 04.04.03-113 after solving the problem from 1.
    Advance thanks

    Reply

    1. 1) Think you have made changes to your MyCloud that caused this to happen, the sshd.conf maybe? A factory reset won’t fix this. So I suggest that you download the firmware then reflash it manually from the Dashboard. If you haven’t done any mod prior, try upgrading or using other putty versions.

      2) Click on the transmission app link on top of this post and follow its easy step by step instructions 🙂

      Reply

      1. Thanks for the reply.All that was installed this firmware v04.04.02-105 + transmisson with your installation, then got the official upgrade to 04.04.03-113 and was having problems with the putty when it is automatically closed after entering the login and password. maybe even have options?I apologize for writing text, use a translator.Thank you

        Reply

        1. Ok this happens right after the firmware upgrade means no mods were done. Try another version of putty. You could also use smartphones like Android app ConnectBot or IPhone Serverauditor to SSH into the MyCloud. If you still have issues, I recommend you download the firmware manually from WD then reflash again from the Dashboard. Other than these I’m not sure what else could be done 🙁

          Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

To create code blocks or other preformatted text, indent by four spaces:

    This will be displayed in a monospaced font. The first four 
    spaces will be stripped off, but all other whitespace
    will be preserved.
    
    Markdown is turned off in code blocks:
     [This is not a link](http://example.com)

To create not a block, but an inline code span, use backticks:

Here is some inline `code`.

For more help see http://daringfireball.net/projects/markdown/syntax

…_\m/