Loading..._\m/
WDMyCloud4TB

WDMyCloud

Live Counter

P/S: There's also a donation button of any generous amount to buy me coffee (-:
If you’re happy with these free contributions, the least you could do is to click the “heart like” icon on the first thread of the post in the WD forum.

 

Disclaimer: As I’m frequently updating the original guides and installers here on TeaNazaR.com, I will not be responsible for any brick issues if you were to follow my obsolete guides copied elsewhere. Thus subscribe to this post to get latest updates. Modifying any part of a device may void its warranty. 

Looking for the original WDMyCloud guides posted by me? They can be found on the WD Community forum as below. Ищите оригинальные инструкции к WDMyCloud, написанные мной? Они могут быть найдены на форуме Сообщества WD по ссылкам ниже. Buscando las guías originales WDMyCloud escritos por mí? Se pueden encontrar en el foro de Comunidad WD como abajo. 寻找张贴了我原来的WDMyCloud导游?他们可以在下面的WD社区论坛上找到。

Please be reminded that these installers are only meant for WDMyCloud single drive variant (firmware V4 and above), not Mirror/EX2/EX4 as I do not have those other devices to support them. You’ll need to reinstall them again after every firmware upgrade. Thanks a lot to those who has donated generously, rest assured you’ll continue to get full priority support from me (-:

Loading…

758 thoughts on “WDMyCloud”

  1. Same here.
    From the WD forum page, I click the link to this site here
    Then I click into the captcha box, get forwarded to an ad page.
    I wait the required 5 seconds, and click “skip ad”.
    Then I get forwarded back to this site, but the captcha box is gone!

    I have tried on various platforms: Desktop PC, Android Smartphone, iPad.
    And with various browsers. Of course, I switched off the ad-blockers and all forms of blocking tools/add-ons.

    This is very frustrating.
    Do I have to buy something at the ad pages for the credentials to work???

    1. Apparently this is a scam. The guy is just collecting ad money and making us look at the ads for nothing.

  2. Avatar Francisco says:

    Hello.
    I cannot get the credentials.
    Can you help me?

  3. infinite loop trough adds, I understand everybody needs to earn, but there is no possibility after 10 times to get credentials means that it is not possible to get without donation or there is mistake in code – there is no TRANSMISSION info (see picture)

  4. Hello,

    I want to download and install bubbleUpnp server on my WD my Cloud running version 4 firmware.

    Before I donate, I have a few questions;

    Does this server software actually work?
    Does this software come with detailed instructions on how to install?

    What is the support for this endeavor?

    The more info/help the better I will feel about donating.

    Thanks

    1. Hi there,

      Sorry I missed out your comment earlier, been very busy lately. Yes the app works, I’ve tested it before. Just run the installer, it will automatically install the app for you. Installation part I can help but app itself better support comes from its developer. Still I would assume you already know how to use the app prior running it on the MyCloud.

  5. Is this still active? if i donate, do i get DonationID to get the apps? thanks!

    1. i can’t get through the ads, its looping to everywhere. i don’t know if this is still active, i would like to donate if it is.

      1. Some might succeed using the captcha and some don’t. Unfortunately I don’t have the time to fully fix this as the cause is not from my site but the advertiser who kept changing their stuffs.

    1. Hi Veronica,

      All these apps are for the MyCloud first generation with firmware version 4. I do not have the other models to work with. I could help to build the apps for your NAS but I’ll need full access to it and of course some time. Please send in your request via the feedback form.

  6. Hello Nazar,
    is it possible to implantate an emulator like “wine” to start a windows executable file without a brick of Cloud ?

  7. Hello,

    What do you think, is it possible to install jellyfin on Wd My Cloud?

    Thanks for your reply

    1. Think it would be possible to install but not to run. The MyCloud lacks the hardware resources like CPU, RAM and hardware acceleration. Jellyfin still struggles to transcode FHD on my other NAS with hardware acceleration 2.5GHz burst quad core and 16GB RAM.

      1. Thanks. I don’t care too much FHD at the moment, i just want somthing stablle to play my videos, mainly SD.
        But i don’t want to mess up my WD, as all my personal things on it, so i don’t know, what to do.
        I have a Samsung Tv (Smart, one year old), but can’t play the AVI, i don’t know why…
        And can’t put subs on.. so, i try to stream with Amazon stick and tried Kodi, VLC, but all buffering for long, while playing movies, and Lagging… Crazy.
        Internet perfect, but strugeling with playing media files on my Samsung Tv…

        But, thanks you for your reply!

          1. The TV doesn’t play AVI probably due to unsupported codec. Transcoding will be required i.e. from Plex, Jellyfin or Kodi etc. Best for you is to convert all those to MP4 h.264. Do this from a more powerful laptop or desktop.

          2. Newer Samsung TV doesn’t seems to pickup sub files on DLNA. You’ll need to embed the srt into the video without transcoding so the process will be quick. I did this previously for my new TV on all my video files using ffmpeg. This can be done on the NAS itself but you’ll need ffmpeg and script to do it. For ffmpeg, look for the app bubbleUPnP that I bundled it together. Or to save the trouble use any apps like handbrake.

          3. Playing directly without transcoding shouldn’t cause any lag else something is wrong with your internal network setup. Check that all interface are 1Gbps. Try to troubleshoot each node separately to single out the culprit.

Leave a Reply

Your email address will not be published. Required fields are marked *

To create code blocks or other preformatted text, indent by four spaces:

    This will be displayed in a monospaced font. The first four 
    spaces will be stripped off, but all other whitespace
    will be preserved.
    
    Markdown is turned off in code blocks:
     [This is not a link](http://example.com)

To create not a block, but an inline code span, use backticks:

Here is some inline `code`.

For more help see http://daringfireball.net/projects/markdown/syntax

…_\m/

%d bloggers like this: